Turn Your Ugly Vinyl Roller Shade Into a Work of Art
Today I'm sharing how how to brand a fabric covered vinyl roller shade.
Do I honey this plain, boring vinyl shade?
Ummm….. no…. and that's a huge understatement because my principal sleeping accommodation has THREE!!!
Yikes!
Two of these 33″ x 59″ windows are e facing then we actually need the sunday blockage in the morning.
These blinds are perfectly practical, simply too perfectly dreadful.
And so that's almost to change.
Before removing the shade from the window I measured the lesser of the blind to the pinnacle when pulled completely downward.
So I lay the blind on the flooring and measured that same distance, 60″, and marked the spot with a marker on both sides of the shade.
Enter my fun and funky cloth. It has a vintage/retro vibe to me, and I fell in love with it. I thrifted ii double size apartment sheets a while back for $i a piece. I merely knew I would notice a use for them someday.
It's a lightweight cotton wool which is perfect for this project. Annihilation likewise heavy wouldn't work because the shade would become likewise beefy.
I cut my sheet in half and 65″ long. This left me with a few inches to spare on either side and the bottom.
I hate ironing, and so I didn't fifty-fifty fe the textile before starting… and it didn't matter a bit.
One time I was sure I had my fabric where I wanted it with enough overage on all sides I started gluing it down.
I turned the material upward at the bottom of the bullheaded almost eight-x inches and sprayed the agglutinative. I then pulled the cloth dorsum into place, and smoothed it out with my easily
Next I pulled the rest of the fabric back toward me to where I had sprayed the agglutinative and I sprayed most some other 8-ten inch surface area.
Then I gently moved the fabric into place and smoothed it down with my hands.
I continued to do this along the shade.
Working my fashion slowly forth, spraying and smoothing, spraying and smoothing.
Information technology'south important to make sure that there's adhesive coverage all over the shade or the shade might non whorl up properly.
One time I reached the top I then turned the shade over and trimmed the excess fabric from the sides, and bottom.
And then I spray glued the edges down. This is what volition be facing the street.
The spray agglutinative that I used was Elmer's Craft Bond. It'due south what I had on hand and information technology worked corking. I had a window open a scrap to ventilate the room. Information technology can be a petty fumey considering information technology's rather a big project. The all-time scenario would be to do this outside, just with the crappy weather we've been having lately that was impossible. A garage would likewise be good.
The directions read that for a permanent bond surfaces should be adhered within xv seconds so working fast is the key, which is why I did small sections at a time.
I added pink duct record along the top of the blind where the cut cloth border is. This gives it a nice edge and protects the textile from fraying.
Co-ordinate to the directions the adhesive needs about i hour to set, so I hung it upward for a couple of hours.
Then I removed the shade, rolled it all the way up by hand, and installed it back on the brackets in the window for the large test.
And information technology worked. Yay!!
My shade roller is visible at the top because hanging the shade this style makes it sit further dorsum in the window, which means more light blockage.
No worries. My next projection is an like shooting fish in a barrel and cheap window valance to comprehend that up.
Hither's the earlier and after.
It'southward and so freakin' cheerful. I honey it!!
That wacky pinkish floral makes me chuckle every fourth dimension I walk into this room. It'll really cheer upwardly the space on those freezing cold and sunlight-shortened days of winter, and that'south exactly what I want.
Then it is possible to plough ugly duckling boring vinyl shades into beautiful unique swans, inexpensively, and tailored to your own way. In my case this makeover will toll about 50 cents a window. How'south that for thrifty?
And so, one window down and two more to go… and then the window valances. Little by piddling this main sleeping room makeover is getting done, and I'k having such fun.
If you enjoyed this project, yous might also enjoy my kitchen faux tea towel roller shade makeover, and my living room vinyl blind makeover with spray paint and lace.
Have a fun and fabled day, and until next fourth dimension..,
Keep on keepin' on.
Source: https://colormethrifty.com/diy-fabric-covered-vinyl-roller-shade/
0 Response to "Turn Your Ugly Vinyl Roller Shade Into a Work of Art"
Post a Comment